Emergency call-out
Machine down goes to the front of the line. Diagnosis starts on the phone; travel starts after.
MS² Machinery, LLC — Conroe, TexasService · Applications · Machine tools · Tooling
Anyone can sellyou the machine.We keep it cutting.
CNC service and repair for any make — Swiss or fixed headstock — plus Citizen Swiss programming & applications support. The tooling lines exist so the machine we fix stays fixed.
HeimatecMP SystemsOemetaSIMTEKCarmexAKKOFMBEDGE TechnologiesApplications EngineeringESPRIT ProgrammingSwiss & Multi-AxisService Contracts
01 The bread and butter
Service, repair, applications.
Sales is the side of the plate. Keeping spindles cutting — any make — is the meal.
Repair & rebuilds — any make
Citizen, Star, Tsugami, Haas, Mazak, Okuma… dealers service what they sell; we service what you own.
Preventive maintenance
Contracts matched to your hours and coolant chemistry, so the emergency never happens.
Applications engineering
ESPRIT programming and automation, prove-out, cycle-time rescue and lights-out setup — for machines we did not sell you.
02 The catalog
Shop it by the cut.
You don't buy brands, you buy operations. Pick the one the part needs — every family is quotable in one click.
Thread itCarmex · AKKO · whirlingGroove & part itAKKO · SIMTEK · Swiss-LineDrive itHeimatec live tooling · 48,000 rpmFeed the barEDGE — Ø0.8 to 100 mmMicro / SwissFeatures from Ø0.3 mmCool itOemeta — Airbus-approved chemistryWhirl itBone screws to ISO 5835Program itESPRIT applications & automation — by us
03 Products we supply
The lines behind the work.
Lines we specify, install, commission and support — not brokered, not drop-shipped and forgotten.
HeimatecLive tooling & angle headsDriven tools, speeders and angle heads for Swiss and multi-axis — up to 48,000 rpm.Explore the line MP SystemsHigh-pressure coolant · chillers · mist collectionCoolant delivered at the pressure and temperature the process actually needs, plus the filtration and air handling around it.Explore the line EDGE TechnologiesBar feeders — featured19,000+ installs behind the line. Magazine feeding from wire to 100 mm bar.Explore the line FMBBar feeders — featuredGerman-built magazine feeders, specified against the machine and shift pattern you actually run.Explore the line CarmexThreading & groovingThread mills, inserts and whirling — oil-country to bone screws.Explore the line OemetaCoolants & lubricantsAirbus-approved chemistry, non-cytotoxic options for medical work.Explore the line
Additional brands available by request — bar feeders, chip and coolant management, filtration and work support. If it belongs on the machine, we can source it — ask on the quote form and name the brand you want.
04 The numbers
We sell by the spec sheet.
Every figure on this site comes from the manufacturer's own catalog. That is the whole sales pitch.
rpm — Heimatec speed increasers
Ø0.3 mmSIMTEK minimum working bore
EDGE bar feeder installations
Coolant-through pressure, live tools
ServiceAny make — contract and call-outAlignment, troubleshooting, rebuilds and revival of machines other people wrote off.
TerritoryTexas and the Gulf CoastField service travels. Applications support does not stop at the state line.
DisciplinesSwiss · Multi-axis turn-mill · Machining centresSliding and fixed headstock, sub-spindle work, B-axis, driven tooling.
Lines we supplyHeimatec · MP Systems · Carmex · SIMTEK · AKKO · Oemeta · EDGE · FMBSpecified, supplied, installed and supported — not brokered and forgotten.
Programming & automationESPRIT — posts, toolpaths, prove-outApplications engineering we perform, including for machines we did not sell you.
Response targetOne business dayFaster when the spindle is down.
05 Who we serve
Work that ends up inside people, planes and wells.
If your parts carry a serial number and a liability clause, you're in the right place.
Medical & orthopedic
Bone screws and implants: whirling to ISO 5835 across three of our lines, coolant qualified non-cytotoxic to EN ISO 10993-5.
Aerospace & defense
Titanium and nickel-alloy programs: HBA-grade threading to 62 HRc, ester coolants approved by Airbus and Bombardier.
Oil & gas
API Round and Buttress casing threads, multi-tooth chasers, oil-country forms from V-0.038R to VAM.
High-volume production
19,000+ bar feeder installs behind the EDGE line. One operator, four spindles, an unattended second shift.
Machine down right now? Every hour is money you already spent.
06 Process
How the work goes.
Four steps. The third one is where most vendors leave.
Assess
We start at the print and the material, not the machine list. Cycle time, tolerance, volume, and what is actually failing today.
Specify
Machine, tooling, workholding, fluid and automation quoted as one system, with the cost per part written down.
Install & prove out
Set, aligned, programmed and running your part to print before we call it done.
Support
Contract service, tooling replenishment and applications help for the life of the machine.
07 About the owner
“Slow is smooth. Smooth is fast.”
MS² is run by Chris Armstrong — a Swiss machinist and field service technician who taught himself on a 1993 Citizen sliding headstock and spent years fixing the machines nobody else would touch. The company exists on one belief: the people who sell the iron should be the people who program it, tool it, and answer the phone at 6 a.m. when it stops. Service, support, solutions — in that order.
MS² Gear coming soon — shirts · hoodies · caps
Wear the mark. First drop is being put together.
08 Contact
Send the print.
Tell us the part, the material and the number you have to hit. If a machine is down, say so in the first line and it goes to the top. Print confidential? Start with the NDA instead.
Shop — 19940 Texas 242, Conroe, TX 77306